Teleco TVDMM868A05, Manual

Page: 6 / 16

6
1.5 - Memorization of 3 channel transmitters
The buttons of the memorized transmitter will have the following functions:
CH5 dim UP, CH6 dim DOWN and CH7 turns ON/OFF the load.
1.3 - Memorization of one transmitter button with ON function
The button memorized with On function turns on the control unit at the last output level.
1.4 - Memorization of one transmitter button with OFF function
The button memorized with Off function turns off the load.
2- Press the button P2 three times
and hold it down the third one, the
buzzer will make a beep each time
and then sounds continuously.
3- During the beep sound press
the button of the transmitter to
memorize; the memorization is
indicated by the intermittent sound
of the buzzer.
Press P2 three times
and hold it down
Press P4
to select the output
1- Select the output to
associate by pressing the
button P4 (the selection will
be indicated by the relative
led ON).
2- Press the button P2 four times
and hold
it down the fourth one, the
buzzer will make a beep each time
and then sounds continuously.
3- During the beep sound press
the button of the transmitter to
memorize; the memorization is
indicated by the intermittent sound
of the buzzer.
Press P2 four times
and hold it down
Press P4
to select the output
1- Select the output to
associate by pressing the
button P4 (the selection will
be indicated by the relative
led ON).
2- Press the button P2 five times and
hold
it down the fifth one, the buzzer
will make a beep each time and then
sounds continuously.
3- During the beep sound press the
button of the transmitter to memorize;
the memorization is indicated by the
intermittent sound of the buzzer. All
the buttons of the transmitter are
automatically memorized with a preset
configuration as in the above drawing.
Press P2 five times
and hold it down
Press P4
to select the output
1- Select the output to
associate by pressing the
button P4 (the selection will
be indicated by the relative
led ON).
CH5: Dim +
CH6: Dim -
CH7: On/Off