1.6
REACH
AND BROADBAND
1.5
REACH
AND EXTENSION TELEPHONES
- 5 -
It is very important that all telephones in the user’s home are connected to the
Reach
TEL
socket.
This method of connection ensures that an alarm call on the
Reach
unit will always disconnect any
other equipment that might cause connection difficulties.
Broadband Service Providers will supply a filter module to plug into the telephone line to allow
connection of a computer and a normal telephone. Only one filter module is required to connect the
computer, telephone and
Reach
when configured as shown below:
The
Reach
and the computer are connected to the filter module.
The user’s telephone is plugged into the
Reach
TEL
socket.
If extension telephones are fitted they should be connected as shown in section
1.5
above.
If you experience connection difficulties or noise on the
Reach
audio, then a poor quality filter may be
the cause. Approved filter modules are available from Tynetec - Order P/No. W00409
