ААНЗ.464414.001-03.61 РЭ p.5
Heat emission of the radio should not exceed:
for R-1150-00 version:140 W in the receive mode and 750 W in the transmit mode;
for R-1150-01 version:140 W in the receive mode and 1200 W in the transmit mode;
for R-1150-02 version:140 W in the receive mode and 3200 W in the transmit mode.
1.1.2 Technical Specifications
1.1.2.1 Specifics of Radio Operation
When the radio is used properly, it has the following capability:
support of the digital techniques of technical data masking;
compatibility with DTEs, which provide secure communications;
variable level of output power (four power gradations, namely, 100%, 50; 25%
12,5%: 100, 50; 25; 12,5%);
operation in "ALE" mode (adaptive selection of the working channel with automatic
link establishment mode) in compliance with MIL-STD-188-141B;
operation in digital telephony mode (digital voice), using MELP voice conversion
techniques;
operation in compliance with Data Link Layer Protocol (ARQ), which provides
automatic request for repeat or retransmission;
Electronic Protection Measures (EPM) protect communications from hostile
interference using the FHSS mode;
an embedded Global Positioning System (GPS) receiver option provides the
accurate time-of-day and local position information;
the embedded self-testing capability provides the radio operator with the information
about the radio operability;
operation in the single-frequency simplex mode , as well as double-frequency
simplex mode;
operation in the radio silence mode;
24 hour continuous operation capability
роботи;
remote control from the individual terminal in compliance with the RS-232 protocol;
remote control from the individual terminal in compliance with the Ethernet protocol;
operation in the LAN network in compliance with the Ethernet protocol; data
communications with 50 to 19200 bps rate due to built-in modems that support operation in
compliance with protocols ARQ, STANAG 4444, MIL-STD-188-110B, APPENDIX F,
STANAG4539/MIL-STD-188-110B, MIL-STD-188-
110A, § 5.3 and FSK;