ААНЗ.464414.001-03.61 РЭ p.41
System preset
parameters
Name : 001
Mode of operation :
DM
Modem preset
parameters set
Modem preset
parameters: S4481
Channel number:
Channel preset
parameters
FHSS key
Number: 01
Name: S4481
Receive
frequency: 14.500
Type: 300C
Transmission
frequency: 14.500
Coding: S
Emission class:
USB
Mode of operation:
ХХ
Break delay: 2,5
Data rate: 2400
Output power:
100%
Figure 15
– Example values of the parameters, set during the programming
1.1.4.7 Quick change of parameter values
The values of any parameter, set in the radio during the programming of the system
preset parameters set, can be changed at any time during the radio performance.
The radio is capable to change parameters manually and allows to set their new
values, that are valid right after their entering, and also remain permanent even after the
radio
’s “OFF-ON’ cycle Restoration of these changes is made by the function of system
presets, described in par.2.4.4.10.
Channel 000 is a technological, changes made on the 000 channel, are not restored.
1.1.4.8
«AM» mode
The
“AM” (Fix) (analog mode) mode is used for common voice communications on
fixed frequency. In this case the desired operating frequency and correspondent emission
class is programmed for each channel. In the type of operation selection menu this marked
with “Analog Mode”. The “AM” mode is to be used to operate with older radios.