Model 458-3SL (3-Slot Chassis) Rev A
Page 33
Insert fuses as shown. The fuse block is then inserted (with the fuses facing the unit) by sliding the
block inward while aligning the circular slot on the left side with the post inside the housing. Press
gently to seat the fuse block. See
Sample Installation
at the end of these instructions.
100 V, 120 V Configuration *
*
100-V and 120-V systems use one 250-V, 0.250-A Slow-Blow 3AG fuses (Digikey # F2534-ND)
Insert the fuse as shown. The fuse block in then inserted (with the fuse facing the unit) by sliding the
block inward while aligning the circular slot on the left side with the post inside the housing. Press
gently to seat the fuse block. See
Sample Installation
at the end of these instructions.
One fuse is inserted into
the side with one fuse
holder.
Circular slot will align with
post inside fuse housing
during installation.
