TA
-
833
0
Installation Manual
Last Revised:
5/9
/12
16
Enseo Set Top Box
(with ANY TV)
For
Enseo
HD3000 STB firmware v.2.12.04+ / HD2000 STB firmware v.2.10.29.17+
Follow the cable
connection diagram below.
ASM DIP Mode: UP
-
DWN
-
UP
-
DWN
Configure Enseo STB:
Press <Cha
nnel Up>, <Right Arrow>, <Left
Arrow>,
<M
UTE>
to enter set
-
up screen. Go to Control Options and AUX panel.
Set BAUD Rate to
1152
00.
Configure TV Menu Settings
accordi
ng to the TV make/model
listed.
Special Notes:
The ASM Installation Kit contains an
RS232
3.5mm control cable. Use this cable for the
Control connection to the Enseo STB.
For Enseo HD2000, use the RS232 Male control
cable included in the ASM installation kit.
If your hospitality TV has a built
-
in LodgeNet
terminal (internal terminal car
d), plug the
Game/Data cable into the TV’s DATA port.
To use the charging feature of iDock, make sure
to
connect the
USB Power Supply to a wall
outlet
.
Be sure the ASM DIP Switches are set to the
appropriate positions:
Summary of Contents for TA-8330 iDock
Page 1: ......
