TeleAdapt TA-8330 iDock, Installation Manual

Page: 7 / 24

TA - 833 0 Installation Manual
Last Revised: 5/9 /12
7
Electrical Requirements
A 1 10/240 - volt, 50/60Hz electrical supp ly is required for the TA - 8330. The ASM requires
a 5 - volt power source, which can be achieved through the USB port on most hospitality
TVs.
Care and Maintenance
Though TeleAdapt iDocks are designed for durability, they still remain complex
electronic devices. As such, care needs to be taken with how they are handled. The
following are tips to care for your system:

If the iDock has visible smudges, fingerprints, or other foreign material, you can
clean it by using a soft clean cloth such as a lens or eyeglass c leaning cloth.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the
iDock or ASM.

Your TeleAdapt product should never be positioned or installed anywhere where it
could get hit, dropped, or banged around.

Do not drop, knock , or shake the device. Rough handling can harm internal
operations.

Your iDock and ASM should be dry. Liquids or moisture can cause damage to
internal electronic circuits. If your unit gets wet, immediately remove power allowing
the unit to dry before re - applying power.

Do not store the iDock or ASM in hot areas. High temperatures can shorten the life of
electronic components and warp or melt certain plastics.

Do not attempt to open the ASM gaining access to the internal infrastructure. Please
notify TeleAdapt service and support personnel regarding return materials
authorization policy.