TA
-
833
0
Installation Manual
Last Revised:
5/9
/12
22
Philips North America
Follow the cable connection diagram below.
ASM DIP Mode: DWN
-
DWN
-
UP
-
DWN
Configure TV Menu Settings according to model year listed.
Philips
HFL 2011
Models
For nnHFLL/F7, nnHFLD/F7, nnHFLF/F7, and nnHFLH/F7 models. This
installation requires
Philips TV firmware version 1.13.
*
Be sure to connect
Composite cables to
TV’s REAR AVIN ports
Configure TV:
Using
guest remote control, enter the set
-
up menu by
pressing <3>, <1>, <9>, <7>, <5>, <3>, <MUTE>.
Ensure following is se
t:
-
Under
PPV/VOD
, set
SerialXpress = YES
Philips HFL 2009
/2010
Models
For nnHFLD/27, nnHFLV/27 and nnHFLL/27 models
Configure TV:
Using
guest remote control, enter the set
-
up menu by
pressing
<3>, <1>, <9>, <7>, <5>, <3>, <MUTE>. Under
Communications, s
et
SP
-
SP1
to RS232 Serial port. Select SAVE and Baud
Rate will default to 9600.
Philips HFL/HF Models with an External PPV STB
Special Notes:
The ASM Installation Kit contains an RS232
control cable. Use this cable for the TV’s
SerialXpress connection.
To use the charging feature of iDock, make sure
to
connect the
USB Power Supply to a wall outlet
.
For 2011 Models
2011 hospitality displays will require the Philips
firmware v.1.13
The ASM Installation Kit contains a
9pin RS232
control cable option. Use this cable for the
SerialXpress
connection.
Be sure the ASM DIP Switches are set to the
appropriate positions:
Summary of Contents for TA-8330 iDock
Page 1: ......
