Tele Radio TG-R4-26, Installation Instructions Manual

Page: 46 / 66

Chapter 6: LOAD SELECT MODES
CHAPTER 6: LOAD SELECT MODES
LOAD SELECT MODE
NOTE! Before starting to perform these settings, make sure that the stop relays are deactivated!
1. Make sure that the stop button is pressed.
2.Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Load select].
7. Select Load select mode and confirm by pressing the left start button.
- 46 -