Tele Radio TG-R4-26, Installation Instructions Manual

Page: 31 / 66

CREATE PIN CODES
NOTE! You can store up to 10 PIN codes in the transmitter.
NOTE! '0000' is not a valid PIN code.
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [PIN] --> [Enter PIN].
7. Select what position in the list that you want to store the new PIN code in by pressing the left start
button.
8. Enter the new PIN code (4 digits) by pressing the buttons 1-4:
Press... to...
Button 1 Step up
Button 2 Step down
Button 3 Step right
Button 4 Step left
9. Confirm by pressing the left start button.
- 31 -