Tele Radio TG-R4-26, Installation Instructions Manual

Page: 30 / 66

Chapter 4: INSTALLERS GUIDE
CHAPTER 4: INSTALLERS GUIDE
NAVIGATE IN MENU MODE
To navigate when in menu mode:
Press... to...
Button 1 Step down
Button 2 Step up
Button 3 Step left/ go back
Button 4 Step right
The left start button Select/ confirm
The right start button Exit
ENABLE PIN CODES
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Startup Protect.].
7. Select one or more start-up protection choices by pressing the left start button.
Select... to...
[Stored PIN]
Only accept PIN codes registered in the trans-
mitter
[Any PIN] Accept any PIN code
[Allow skip]
Allow to skip any start-up
authorization
8. Confirm by pressing the left start button.
- 30 -