8
9
Program the receiver T60RX-04xSL
STANDARD code on all or individual relays
Program as follows.
1.Press the function button for at least 0.3 sec, longest 4 sec
-Red LED no. 6 comes on (programming the code)
Pressing the function key repeatedly allows you to select between the code
(Red LED), toggling (Yellow LED) or interlocking (green LED).
2.Now press the select button
-Four red LEDs come on above the relays.
3.Now press the function key and select which of
the relays is to be coded.
NOTE-Pressing the function key repeatedly allows you to choose which one
of the four relays you wish to code. You can choose between all relays or only
1, 2, 3, or 4. A red LED comes on above the relay to be coded.
If all of the relays are chosen the
fi
rst relay will work with function key 1 on
the transmitter, function key 2 on the transmitter with relay 2, etc.
4.Press the select button again.
-Release the select button.
5.Now press the function key on the transmitter that is to control
the relay until LED no. 6
fl
ashes 3 times.
6.The standard code is now stored.
-The red LED no. 6
fl
ashes and indicates that the transmitter is programmed.
GB
NL
SWE
D
GB
NL
SWE
D
