10
11
Program the receiver T60RX-04xSL
Register the Standard code and Private code on all
or individual relays.
Only for the T60 system
Program as follows.
1.Press the function button for at least 0.3 sec, longest 4 sec.
-Red LED no. 6 comes on (programming the code).
Pressing the function key repeatedly allows you to select between the code
(Red LED), toggling (Yellow LED) or
interlocking (green LED).
2.Now press the select button.
-Four red LEDs come on above the relays.
3.Now press the function key and select which of
the relays is to be coded.
NOTE-Pressing the function key repeatedly allows you to choose which one
of the four relays you wish to code. You can choose between all relays or
only 1, 2, 3, or 4. A red LED comes on above the relay to be coded.
If all of the relays are chosen the
fi
rst relay will work with function key 1 on
the transmitter, function key 2 on the transmitter with relay 2, etc.
4.Press the select button between 0.3 sec and 0.4 sec.
5.Release the select button wait max 1 sec.
6.Press the select button again for more than 1 sec.
7.Now press the function key on the transmitter that is to control
the relay until the red LED no. 6
fl
ashes three times.
8.The standard code and private code are now stored.
-Red LED no. 6 double
fl
ashes to indicate that private code has been stored.
GB
NL
SWE
D
GB
NL
SWE
D
