12
13
Program the receiver T60RX-04xSL
Programming the toggling/instantaneous function
Program as follows.
1.Press the function key twice so that the yellow LED no 7 comes on
(program a toggling relay).
2.Now press the select button.
-The red LED above the
fi
rst relay comes on.
3.Press the select button and select whether the
fi
rst relay should be toggling
or not. If the yellow LED is on the relay is toggling, if it is out the relay is
not toggling.
NOTE! You can use the function key to step to the relay 2, 3 or 4 that should
have the toggling function.
After the fourth relay the program is stored.
4.Continue to press the function key until all four relay LEDs
have gone out.
-Yellow LED no. 7
fl
ashes once (the function is now stored).
5. The toggling function has now been programmed.
-Yellow LED no. 7
fl
ashes and indicates that one of the relays has a
toggling function.
GB
NL
SWE
D
GB
NL
SWE
D
