Main Thread Number [0|1]
: 0
DHCP running
web info: Waiting for connection on socket 0.
• The device is now in BOOT mode with the default IP configuration from BOOT (IP address 192.168.1.1 and mask
255.255.255.0).
Accessing the BOOT menu from the console without using the RST button
It’s also possible to access the BOOT menu without using the RST button if you have access to the device’s local
console. Simply press any key via the console during the start up process when the following text appears: “*** Press
any key to stop auto run (x seconds) ***”, and before the indicated seconds run out. This way, the C.I.T. start up can-
cels and the device pauses in the BOOT prompt: “CFE>”. From this menu, you can access all the BOOT menu com-
mands. Below you can see an example of a C1+LS start up:
CFE version 1.0.37-102.9-01 for BCM96358 (32bit,SP,BE)
Build Date: Thu Dec
3 11:02:34 CET 2009 (jsirodey@orion)
Copyright (C) 2000-2008 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Boot Address 0xbe000000
Board IP address
: 192.168.1.1:ffffff00
Host IP address
: 192.168.1.100
Gateway IP address
:
Run from flash/host (f/h)
: f
Default host run file name
:
Default host flash file name
:
Boot delay (0-9 seconds)
: 3
Boot image (0=latest, 1=previous) : 0
Board Id (0-0)
: 96358C1PL
Number of MAC Addresses (1-32)
: 4
Base MAC Address
: 00:a0:26:6e:00:58
PSI Size (1-64) KBytes
: 24
Main Thread Number [0|1]
: 0
DHCP running
*** Press any key to stop auto run (3 seconds) ***
Auto run second count down: 3
web info: Waiting for connection on socket 0.
CFE>
1.4.3 Procedure to force start up in BIOS mode
Follow the steps below if you want to force device start up in BIOS mode in order to access the BIOS menu (where
you can relicense or delete the configuration files and the rest of the commands).
• Turn off the device through the ON/OFF switch.
• Using a sharp object, press the RST pushbutton and hold it down.
• Turn on the device with the ON/OFF switch.
• Wait until the WLAN LED begins to flash (see
on page 16). Keep the RST pushbutton held down.
Teldat S.A.
1 Installing the Router
Teldat C1+LS Router
15
