4Ge cellular1/0 AT+network performance
RSCP (-dBm) measured during the last 9 samples
111111111
000000000
20_
771577766
30_|
40_|
50_|
60_|
70_|
80_|
90_|
100_|
110_|
..:......
120_|___________________________________________________:::::::::
older
newest
EcIo (-dB) measured during the last 9 samples
11
1
0_
335889892
2_|
4_|
6_|
.
8_|
:
10_|
:::.:.
12_|
::::::
14_|
..:::::::
16_|
:::::::::
18_|
:::::::::
20_|___________________________________________________:::::::::
older
newest
4Ge cellular1/0 AT+
In the monitoring menu of the cellular1/1 interface, we can call up data on the connection to the cellular network.
4Ge +network cellular1/1
-- Direct IP Monitor --
4Ge cellular1/1 NIC+?
bitrate
Bit rate monitor
clear
Clear interface parameters
list
List interface parameters
statistics
Interface statistics
exit
4Ge cellular1/1 NIC+
With the list command, we can see the data that identifies the 4G module and the status of the data connection to
the 4G network.
4Ge cellular1/1 NIC+list
Drop by ping failed
= 0
Drop by tracert failed
= 0
Drop by traffic failed
= 0
Drop by carrier loss
= 0
Dialers registered
= PROFILE
Current dialer registered
= PROFILE
State
= (9) CONNECT
Call request
= 1
Connections established
= 1
Access Point Name
= internet.es
Total connection time
= 8 minutes 8 seconds
Current connection time
= 8 minutes 8 seconds
Time to establish connection = 9 sec
Hardware Interface address
= D20A21370108
Low layer link state
= Up
4 Monitoring via the console
Teldat S.A.
16
Teldat 4Ge
