Command history:
Release
Modification
11.01.05
Option 43 can now be configured to add a code to each value that makes up the Vendor
Specific Information.
3.2.1 DHCP
Like the Cisco router, the Teldat router is the DHCP server for the Teldat 4Ge and we will use the DHCP protocol to
set certain Teldat 4Ge parameters, such as the SIM PIN number and the cellular WWAN APN.
; -- DHCP Configuration --
server
; -- DHCP Server Configuration --
enable
;
;
subnet 4Ge 0 network 1.1.1.0 255.255.255.0
;
host 4Ge 0 fixed-ip 1.1.1.2
host 4Ge 0 client-id asc teldat
host 4Ge 0 router 1.1.1.1
host 4Ge 0 subnet-mask 255.255.255.0
host 4Ge 0 option 43 asc antenna&apn=internet.es&pin=1016&ntps=192.168.215.115&usr=monitor&pwd=teldat
;
exit
The router option assigns a default route to the Teldat 4Ge. This route is necessary if the Teldat 4Ge and the TFTP
server are in different networks.
The client-id option indicates the “client-id” that the router expects to receive in the DHCP request from the Teldat
4Ge. The value of this option must be the “antenna” characteristics.
Through option 43, the Teldat 4Ge receives the configuration parameters required to make it work. The syntax and
meaning are the same as that described in the section entitled
on page 8 under the section entitled
on page 7.
The first word in option 43 should be “antenna”, which allows the Teldat 4Ge to accept the address offered by the
router. If this word is not used, the Teldat 4Ge won’t accept the address.
3 Configuration
Teldat S.A.
12
Teldat 4Ge
