
KURTH ELECTRONIC www.kurthelectronic.de [email protected]
8
Operating Manual
KE2500
Telco Multimeter
OPERATING
Starting & general rules
The KE3600 works with an operating system that has to be
booted. The boot menu with various device parameters
such as the hardware and software versions appears at the
end of the booting process. You can bring up the
Main Menu
immediately by pressing any button.
The user can make basic device settings in the
Setup
before starting the measurements.
In most cases, the measurements and settings are selected
using the menu-driven user interface. The vertical control
buttons
p
+
q
are used for the selection.
Pressing the
SE
L key confirms the input or starts the
measurement.
To go to the previous screen or cancel ongoing measure-
ments, press
ESC
.
Various cable and test parameters can be selected by
pressing the function buttons
F1 - F4
.
In order to facilitate and speed up the operation, some
modes of measurement can also be selected directly with
the help of the digit keys, e.g. with the key combination
+ in quick succession you can start directly the
Resistance line measurement. The measurements start
immediately after the parameters have been selected.
Save
Some tests have the possibility to save the results. When
available, the memory dialog is called with
F4
. The file
name is entered using the alphanumeric keyboard. Under
F1
abc
¨
123
you can switch between text and number
input, under
F2
Clear
the entire input can be reset.
Individual digits can be cleared with the control buttons and
F3
DEL
. Pressing the backspace key
§
under
F4
deletes
the entry from right to left.
Special characters can be found under the buttons and
.
:
. - / @ : _ + , [ ] ; = ?
:
# $ % & ‛ ( ) { } ~
With
SEL
measurement is then stored ultimately under the
file name entered.
Basically, the user should make the on-screen
instructions in each measurement mode row!
Main Menue
Line Multimeter
Remote Switch Type
Remote Switch Functions
Cable Parameter
Date / Time
Date / Time
1
2
3
4
5
6
Allow USB Access
7
Setup
Loop Analysis
<KE90X>
abc
"
123
Clear
DEL
f
Filename
*
*
#
#
1
2
ABC