KURTH ELECTRONIC www.kurthelectronic.de [email protected]
23
11. Repair and Warrenty
The meter contains devices that are sensitive to static electricity, and the circuit board needs to be
handled with caution. If the protection of a test device was impaired in any way, the device should not be
used further, but be sent in for repair by suitably trained and qualified personnel. The protection of the
tester is likely to be impaired if: there is visible damage, the intended measurement task is not running,
has been stored for a long period of time under adverse conditions, or has been exposed to during
transport heavy loads.
NEW TEST INSTRUMENTS ARE 1 YEAR WARRANTY FROM THE DATE OF YOUR
PURCHASE BY THE USER.
NOTE:
Any unauthorized repair or adjustment of the test device will automatically void the warranty.
Repair and spare parts
If you want the tester to be repaired, contact us at:
Kurth Electronic GmbH
Test & Measurement
Muehleweg 11
72800 Eningen u.A.
Tel: +49-7121-9755-0
Fax: +49-7121-9755-56
E-Mail: [email protected]
To return your product to Kurth Electronic in Germany
1. If a repair is required in a test device, you will be asked to provide the following information to enable
the service department in advance the appropriate receipt of your test device. So that we can provide
you with the best possible service:
n
Model, for example, KE2500
n
Serial number, for example, 00250
n
Reason for the return (eg required repair)
n
Details of the error
Operating Manual
Telco Multimeter
KE2500