www.tekvox.com
TekFlex-16
79201 User Manual
Command
Description
Feedback
[x1]V[x2],[x3],[x4]
…
Transfer signal from input [x1] to output
[x2],[x3],[x4].., separate output channels
with “,”
AV: 01->07
AV: 01->08
…
Save[Y].
Save the present operation to the preset
command [Y], [Y]=0~9
Save To F1
Recall[Y].
Recall the preset command [Y]
Recall From F1
AV: 02->04
AV: 02->06
Clear[Y].
Clear the preset command [Y]
Clear F1
EDIDMInit.
Reset factory default EDID
EDIDMInit.
EDIDM[X]B[Y].
Manage EDID, enable input [Y] learn EDID
data from output [X]
EDIDM07B03
PWON.
Work normally
PWON
PWOFF.
Enter standby mode
PWOFF
STANDBY.
Enter standby mode, can be awaken via
front panel button operations
STANDBY
CustomerSerial:11111
11111111111111.
Set the customer serial number
customer serial is
1111111111111111111
/+[Y]/[X]:******.
a.
Y is the Slot # connected to the far end
device.
b.
Y = 1~16, send this command to the
corresponding HDBaseT receiver to
control far-end device.
c.
Y = A~P, send this command to the
corresponding HDBaseT receiver when
TekFlex-16 is powered on
d.
Y = a~p, send this command to the
corresponding HDBaseT receiver when
TekFlex-16 is powered off
1.
X is for baud rate, its value ranges from
1 to 7 (1--2400, 2--4800, 3--9600, 4--
19200, 5--38400, 6
—
57600, 7--115200)
2.
***** is for data (max 48 Byte)
601%
Volume of MIC : 60
(****** and feedback from
HDBT receiver)
%0911.
Reset factory default
Factory Default
Inquiry Command
Status[x].
Inquire the respective input for output [x]
AV: 01-> 02
Status.
Inquire respective inputs for all outputs
AV: 01->02
AV: 03->06
… …
