TEK-MUHD44TP 4x4 HDBaseT Matrix
TEKVOX, INC.
9
www.tekvox.com
830.460.9099
6.2 IR Control
The HDBaseT 4x4 matrix switcher can be controlled by its built-in IR receiver, through the IR EYE
port by connecting with extended IR receiver or controlled remotely by a far-end IR device through
one of its receivers. By using IR & HDBaseT transmission technology the HDBaseT 4x4 matrix
switcher has the following features:
Control far-end output device from local.
Control local input/output device remotely.
Control the HDBaseT 4x4 matrix switcher locally/remotely.
6.2.1 IR Remote Operation
By using IR & HDBaseT transmission technology, the MUH44TPR2-N has some functions as follows:
1)
Control far-end output device from local.
2)
Control local input/output device remotely.
3)
Control the MUH44TPR2-N locally/remotely.
Usage of IR Remote
①
Standby button, press it to enter/ exit standby
mode
②
Input channels, range from 1~4 (buttons 5~8 are
not available), corresponding IR signal switched
synchronously when switching input channels.
③
Menu buttons,
ALL
,
EDID
and
CLEAR
, same
with the corresponding front panel buttons.
Please refer to
4.1 Front Panel Button Control
for
details.
④
: Navigation buttons.
ENTER: Confirm button.
⑤
OUTPUTS (buttons 5~8 are not available)
In normal mode: output channel selection
buttons, each channel has 1 IR IN, 1 HDBaseT, 1
RS232, and 1 AUDIO outputs, and channel 1~4
have HDMI outputs.
In EDID invoking mode: press button 1/2 to
switch among the 5 embedded EDID data
Note:
With this IR remote, MUH44TPR2-N can be controlled by the built-in IR, the extended IR
receiver connected to the
“IR EYE”/”IR ALL IN” and the IR receiver on the far-end receiver.
