6. System Operation
6.1 Front Panel Button Control
Front Panel Button Control
MUH44TPR2-N provides with convenient front panel button control. Here we make a brief
introduction to the system operations.
Switching I/O connection
To convert one input to an output:
Operation:
“input”+““ENTER”
Example: input 1 to output 2
Note: In default status, 4 IR OUT sockets correspond with 4 HDMI INPUTS. When you convert an
HDMI input to an output, the corresponding IR OUT will be switched synchronously.
To convert an input to several outputs:
Operation:
“input” + “output” + “output” +… + “ENTER”
Example: Switch input 2 to output 2, 4
To convert an input to all outputs:
Operation:
“input” + “ALL” + “ENTER”
Example: Convert input 1 to all outputs
Note:
Indicators of the pressed buttons will blink green for three times if the conversion is done, then
it will be off. If the conversion failed, they will be off immediately.
EDID Management
MUH44TPR2-N features EDID management to maintain compatibility between all devices. It can be
controlled via EDID learning and EDID invoking.
EDID Learning (from output):
One input port learns the EDID data of one output port
Operation: Press “EDID”, ““O“ENTER”.
Example: Input 2 learns EDID data from output 4
All input ports learn EDID data from one output port
Operation: Press “EDID”, “ALL”+“O“ENTER”
Example: All input ports learn EDID data from output 4
Note:
Indicators of the pressed buttons will blink green for three times if the conversion is done, then
it will be off. If the conversion failed, they will be off immediately.
