www.tekvox.com
1201-MV
79033-MV User Manual
4.2 Fullscreen Setting
The default mode is fullscreen, and the default routing is:
Input 1 -> Window A.
In Multiview mode, press the Window A~D buttons to display the
corresponding window in full-screen mode. The corresponding
input source button LED and window button A LED will illuminate
blue, and other window buttons and previous Multiview mode
button LED will go out.
4.3 HDMI Output Settings
MIRROR:
Press to set the local HDMI output as an HDBaseT loop
output, meaning that the HDMI and HDBaseT ports will
simultaneously output the same signal source.
BYPASS HDMI 1:
Press to set the HDMI output port to output the
source signal of HDMI input 1.
4.4 Audio Control
By default, the HDMI and HDBT output audio follows the video
source in Fullscreen Mode. In the Multiview modes, the output
audio will come from the HDMI 1 input. The audio source can be
changed via GUI or RS232 command.
Press the volume knob to select MIC or SOURCE audio. If MIC
audio is selected, then the MIX and MIC mixing audio inputs are
controlled simultaneously.
Rotate the knob to increase or decrease the volume of the
selected audio. Press and hold the knob for at least 3 seconds to
mute the selected audio; rotate the knob to unmute.