www.tekvox.com
MV41+
79141-MV User Manual
3.
Last-Selected Input
: The switcher will remember which input source was last selected when it
is powered off, and will automatically switch to that source when powering back on
4.
Manual Switching
: It is possible to switch sources manually while the switcher is in Auto-
Switching mode, and doing so does not exit Auto-Switching mode
5.
Multi-View
: Changing from Fullscreen to Multi-View mode will not exit Auto-Switching mode
5.3 Video Switching Status Inquiry
In Multi-View mode (
Window A
,
B
,
C
, or
D
LEDs lit up blue)
Operation
: Window #
Example
. Press and hold the
Window B
button for at least 3 seconds. The
Window A
,
C,
and
D
LEDs
will turn off, and the LED of the input source currently assigned to Window B will turn blue. After 3
seconds, the input source LED will turn off, and the
Window A
,
C
, and
D
LEDs will turn back on.
5.4 Audio Selection
By default, the audio source is set to HDMI 1. In Multi-View mode, pressing and holding any of the
Input 1~4
buttons for more than 3 seconds will change the audio output to the corresponding input
source, and the input’s LED will turn blue. After 3 seconds, the input LED will turn off.
Press and hold the
AUTO
button for at least 3 seconds to change the audio output to the LINE IN
audio source.
5.5 Config
5.5.1 Swap Button
Press the
SWAP
button to cycle through display windows sequentially (i.e. A -> B -> C -> D); the
SWAP
LED will light up blue while it is pressed.
Example
: In Multi-View Mode
Example
: In Fullscreen Mode
