Tektronix WVR4000, Service Manual

Page: 16 / 59

Introduction
Hardware Installation
The waveform rasterizer can be used as-is or installed into a rack mount or
cabinet. For instructions for installing the rasterizer into a rack mount or cabinet,
refer to the
WFM4000 and WFM5000 Waveform Monitors and WVR4000 and
WVR5000 Waveform Rasterizers System Integration Technical Reference .
Product Upgrade
No fi eld upgrades are available for the WVR4000 or WVR5000 Waveform
Rasterizers. When software updates become available, you can access them
from the Tektronix Web site: www.tek.com/software. The
WVR4000 and
WVR5000 Waveform Rasterizers User Manual includes instructions for updating
product software.
Operating Information
For basic operating instructions, refer to the WVR4000 and WVR5000 Waveform
Rasterizers User Manual that can be found on the WVR4000 and WVR5000
Product Documentation CD that shipped with this product. For more detailed
reference information, refer to the Waveform Rasterizer Online Help. (Press the
Help button on the instrument and then use the General knob, up/down arrow
keys, and SEL button to navigate through the topics.)
In addition, there is context sensitive help to identify the buttons, knobs, and soft
keys. Press the
Help button to enable the context sensitive help. Press it again
to turn off the context sensitive help.
Power-On Procedure 1. Connect the power cord to the AC adapter.
2. Connect the AC adapter to the rear panel of the instrument and the power cord
to an AC line frequency of 50 or 60 Hz within the range of 100 to 240 volts.
3. Press the Power button.
4. Wait for the system to complete its power-on self-tests.
Power-Down Procedure There are two methods to power down the instrument:
Power Button – Press the Power button to turn off the instrument.
Power Supply – Unplug the instrument from the power source to turn off the
instrument.
2 WVR4000 and WVR5000 Service Manual