![background image](http://html.mh-extra.com/html/tektronix/wfm5200-and-wvr5200/wfm5200-and-wvr5200_how-to-manual_1078784012.webp)
How to Guide
Audio Loudness Monitoring
12
www.tektronix.com\wfm8000
www.tektronix.com\wfm7100
www.tektronix.com\wfm5200
Loudness Session
The
ALOG
option is required for the WFM7x20 and WVR7x20 Series in order to display the
Loudness Session that shows a trend chart of the loudness measurements and the ability
to save the data to USB or download to a PC via a network connection.
How to Configure the Loudness Session Display
1. Select one of the tiles (1,2,3,4) and press the
Status
button
2. Select
FULL
to make the display full screen, pressing
FULL
again will toggle back to
FlexVu™.
On WFM/WVR5200 series use the Thumbnail button to cycle through the tiles and push
and hold the Thumbnail button to toggle between Full and four tile modes.
3. Press and hold the
Status
button to display the menu.
4. Move up and down the menu using the Arrow Keys or General Knob to the
Display
Type
menu.
5. Enter the sub menu by pressing
SEL
and navigate to the
Loudness Session
selection.
(Figure 6).