manualshive.com logo in svg

Tektronix WFM5200 & WVR5200, How-To Manual

Share
Download
Tektronix WFM5200 & WVR5200 How-To Manual Download Page 6

How to Guide 

           Audio Loudness Monitoring 

6     

www.tektronix.com\wfm8000

 

www.tektronix.com\wfm7100

 

www.tektronix.com\wfm5200

 

 

Note

:-

 When the Loudness preset is selected within the Loudness Settings 

menu. Settings that are changed within the Loudness Settings menu by the 
loading of the Loudness preset will be shown in 

yellow 

text. Information 

regarding the settings of the Loudness presets can be obtained by pressing the 
HELP button on the front of the instrument.

 

  
Elements of Audio Display with Loudness Measurements. 
 

 

Figure 3.

 Audio Tile Display.  

 

1.  Loudness Meter is enabled from within the Audio Tile menu and can be selected to 

show the Loudness for the program, a channel pair or disabled and not displayed within 
the audio tile. The Program Loudness (PL) is a summation of a number of audio 
channels. The channels that are included in the summation are indicated within the 
audio display by green channel labels. The channels that are not included in the 
program loudness and are indicated by white channel labels.

                                                  

 

Summary of Contents for WFM5200 & WVR5200





























Reviews:

No comments

Brands by name

Popular brands

Load more brands