Tektronix WFM4000 Series User Manual Download Page 18

Page: 18 / 79

Installation

Accessory

Standard

Optional

Tektronix part
number

WFM50F02

, Dual rackmount for the WFM5000 series and WFM4000

series

●

WFM50F02

WFM50FGM

Anton Bauer battery adapter mounting plate for the

WFM4000 and WFM5000

NOTE.

Battery and charger must be ordered separately.

●

WFM50FGM

Anton Bauer Battery Pack for the WFM4000 and the WFM5000.
For use with the WFM50FGM.

●

146-0156-00

Anton Bauer Battery Charger for the WFM4000 and the WFM5000.
For use with the Anton Bauer Battery Pack.

●

016-2005-00

WFM50FVM

Sony IDX battery adapter mounting plate

NOTE.

Battery and charger not available.

●

WFM50FVM

WFM50FSC

Soft carrying case for the WFM5000 and WFM4000.

●

WFM50FSC

International Power Plugs.

Your instrument was shipped with one of the following power cord options. Power cords for

use in North America are UL listed and CSA certi

ed. Cords for use in areas other than North America are approved by at

least one authority acceptable in the country to which the product is shipped.

Opt. A0 – North America power

Opt. A1 – Universal EUR power

Opt. A2 – United Kingdom power

Opt. A3 – Australia power

Opt. A5 – Switzerland power

Opt. A6 – Japan power

Opt. A10 – China power

Opt. A11 – India power

Opt. A99 – No power cord and AC adapter

WFM4000 and WFM5000 Waveform Monitors User Manual

Summary of Contents for WFM4000 Series
















































































Search results

Summary of Contents for WFM4000 Series

Reviews:

Brands by name

Popular brands

Tektronix WFM4000 Series, User Manual

Search results

Summary of Contents for WFM4000 Series

Reviews:

Brands by name

Popular brands