SDI Eye and Jitter Measurements
How-to Guide
12
www.tektronix.com/wfm2300
12
Enabling Pseudo Color Display
Normally the green or white trace color is used for the waveform displays but it can be useful to enable
the pseudo color display as shown in Figure 9 to highlight the intensity difference of those parts of the
trace that occur more frequently. A blue color is used for less frequently occurring parts of the trace with
cyan, green, yellow and the red showing increasing frequency of that part of the trace.
1. Press the
CONFIG
button to enter the configuration menu
2. Using the arrow key or general knob navigate to
Display Settings
as shown in Figure 9
3. Press
SEL
to enter sub menu and navigate to
Waveform Color
4. Press
SEL
to enter sub menu and select
Pseudo
Figure 9.
Display Setting menu.
