Getting Started
VX1411 MainFrame Instruction Manual
1–13
6. Select the mounting position in the rack: select two 0.5-inch spaced holes in
the front rail and verify that the 1.5-inch and 14.00-inch clearances exist
relative to the mounting holes as shown in Figure 1–6.
NOTE
. The 14-inch vertical clearance is only valid for the mainframe without the
rubber feet and cable trays. Refer to Figures 4–3, 4–4, on page 4–10, for
information on vertical clearances of the mainframe with cable tray options.
355.6 mm
(14.0 in)
304.8 mm
(12.0 in)
38.1 mm
(1.5 in)
Left-front rail
12.7 mm (0.5 in)
(for correct position of
securing holes)
Figure 1–6: Vertical clearance for rack installation (standard mainframe)
7. Select the mounting method according to the rack type.
To mount the slide-out tracks with the front and rear flanges outside of the
front and rear rails, use method A shown in Figure 1–7 when doing step 8.
Add a bar nut to the installation only if the rails have untapped holes.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com