Getting Started
1–6
VX1411 MainFrame Instruction Manual
Installation
This section describes the procedures to install your mainframe. It includes
procedures for installing the mainframe with the rackmount or cable tray options.
This section does not include specific procedures for installing modules in the
mainframe. Refer to your module documentation for information regarding the
module installation instructions.
The VX1411 Mainframe is designed to operate on a bench or in a rackmount
environment. For proper cooling, allow at least two inches (5.1 cm) of clearance
on the rear and sides of the mainframe. Determine how you will use your
VX1411 Mainframe and follow the appropriate installation instructions. If you
ordered your mainframe with the cable tray option and one of the rackmount
options, install the cable tray before installing the rackmount.
WARNING.
Use care when lifting or moving the mainframe to avoid personal
injury while performing the installation procedures.
The VX1411 Mainframe comes a with 0.75-inch cable access area on the bottom
of the mainframe (1-inch with the feet installed for bench-top operation). You
can order the mainframe with an optional cable tray and install the cable tray
following the procedures in this section. The option comes with a butch plate to
mount cable connectors at the rear of the cable tray.
The cable tray option can be installed three different ways as shown in the
following illustrations. In each example, place the mainframe upside-down or on
one of the sides on a clean working surface and follow the instructions in the
illustrations. To install the cable tray you need a T-15 and a T-20 Torx Driver.
Figure 1–1 on page 1–7 shows how to install Option 1U to provide a cable tray
depth of 1.75 inches.
Figure 1–2 on page 1–8 shows how to install Option 1U to provide a cable tray
depth of 2.5 inches.
Figure 1–3 on page 1–9 shows how to install Option 1U to provide a cable tray
depth of 4.25 inches.
You can modify the butch plate to accept cable connectors at the rear of the
mainframe. Specific instructions for modifying the butch plate are not given
since the locations, types, and size of connectors vary with each application.
Site Considerations
Cable Tray Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com