Installation Instructions
20
TLA7012 Portable Logic Analyzer Rackmount Kit Instructions
Equipment Required:
Screwdriver handle with T-15 and #2 Phillips tip (Items 1,
2 and 3).
1.
Pull the shelf out from the rack.
2.
Place the instrument on the shelf.
3.
Align the instrument bracket screw holes with the threaded holes in the shelf.
4.
Attach the instrument to the shelf with three 6-32 screws. Leave the front
right-side screw out. (The screws are stored on the rear of the shelf. See
Figure 12).
Leave this screw out
Three 6--32
screws
Instrument
brackets
Shelf
Extra hardware
provided on rear of
shelf assembly
Figure 12: Mounting the instrument to the shelf
5.
Slowly push the shelf back into the rack. Verify that the instrument handle
and power cord clear the right-side rack rail. If necessary, remove from the
instrument:
a.
The handle, by first removing the right-side cover (six screws), and then
the two handle screws. Replace the cover and mount the handle on the
shelf as described in step 8.
Mount the Instrument
