Installation Instructions
16
TLA7012 Portable Logic Analyzer Rackmount Kit Instructions
4.
Using the method and hardware determined from step 3, secure the brackets
to the rear rails. The screws should be fully, but lightly, seated so mounting
can be adjusted later.
Rear bracket
Bar nut
Rear flange (mounts to
rear rail of rack)
Rear rail
Figure 9: Attaching the rear brackets to the instrument rails
5.
Mount the cosmetic trim on the front, using two 10-32 screws each. See
item 2 in Figure 10. (This helps to guide you where to locate the shelf during
shelf installation).
Equipment Required:
One screwdriver handle (Item 1), one number two Pozidriv
tip (Item 2), and one torque driver (Item 5).
NOTE
. The rack hardware kit contains hardware for mounting the instrument in
several configurations. Not all of the hardware in the kit will be needed.
A standard equipment rack has rails with universal hole spacing. If you use a
rack with other than universal hole spacing, you may have to drill additional
mounting holes in the rack.
Procedure:
1.
Grab the shelf/track assembly and slide the tracks into the brackets on the
rear rails of the instrument rack.
2.
Align the front of the shelf to the bottom of the cosmetic trim on the front of
the instrument rack.
Install the Shelf/Track
Assembly into the Rack
