8
Measurements
The Tektronix TBS1052B-EDU oscilloscope makes a wide variety of automated measurements.
1.
Select
Measure
. Select the channel you wish to measure (Ch1 or Ch2 or Math).
2.
Use the
Multipurpose
wheel to turn on or off any of the available measurements. See
Figure 8
.
Figure 8: Some of the many measurements the TBS1052B-EDU can measure.
Save / Recall – Screenshots, CSV and Setup
The TBS1052B-EDU has a USB port on the front of the oscilloscope that will accommodate a USB drive.
You can save screenshots, comma separated value files (CVS files), and oscilloscope setup information to
your USB drive. You can only recall setup information from a USB drive on the oscilloscope.
Saving a BMP/JPG to your USB drive
1.
Insert a USB jump drive into the front of the oscilloscope.
2.
Press the
Save Recall
button.
3.
Press the
Print Button - Prints
softkey. Use the
Multipurpose
wheel to scroll to
Save Image to
File
then press the
Multipurpose
wheel to select it. Press the
Select Folder
softkey if you wish to
store screenshots into a different folder. You have now set the
button (The button with a
small image of a 3.5 floppy disk) to save screenshots from the oscilloscope to your USB drive.
4.
If you wish to save your screenshot in a different format, select the softkey
Action
. Use the
Multipurpose
wheel to scroll to Save Image, then press the wheel to select it. Now you can
access the softkey
File Format
and select from either BMP or JPG image formats.