Factory Defaults
ST2400A SDH Test Set User Manual
C-3
IO Board Parameters
tx_elec_output= OFF
rx_elec_input= (OPTICAL if APD is present) otherwise ELECTRICAL
Laser power = OFF
Laser wavelength offset = 0
TX elec output = OFF
System Parameters
menu_key= 0
quick_set= INT 155
setup_store_mode= OFF
setup_store_select= 0
System Parameters - NOT reset by *rst
gpib_term= 0
rs232_baud= 9600
rs232_baud_code= 0
rs232_parity= EVEN
rs232_char_size= 0
rs232_char_size_sel= 1
rs232_eol= CR-LF
rs232_xon= OFF
rs232_echo= OFF
rs232_prompt [16]= "ST2400>"
rs232_prompt_lf= 0
remote_header= OFF
measure_mode = SONET or if "SDH DEFAULT" is set SDH
clock_century= "1998/01/01 00:00:00"
audio_vol= 1
view_angle= 4
Summary of Contents for ST2400A
