SPG600 Sync Pulse Generator Rackmount Instructions
1
Kit Description
This document describes how to install the rackmount kit onto your SPG600
Sync Pulse Generator.
The rackmount kit is a collection of parts that, once installed, configures the
instrument for mounting into a standard 19-inch equipment rack.
This document supports Tektronix modifications ECR31439 and ECR31689.
Products
SPG600
All serial numbers
Kit Parts List
Figure 1 on
page 2
Quantity
Part number
Description
1-1
1 ea
351-0104-xx
Guide rack, consisting of: left and right sides
1-2
8 ea
212-A041-xx
Screw, mach: M4 x 8 mm, Phillips
1-3
1 ea
351-0751-01
Track, slide-out sections: pair (LH, RH)
1-3
8 ea
NS
Screw, mach: 10-32, panhead, 3/8 in, Phillips
1-3
6 ea
NS
Screw, mach: M6 x 10 mm, slotted
1-3
6 ea
NS
Bar nut
-- -- --
1 ea
075-0800-01
Technical manual: Instructions, SPG600
Rackmount kit
NS - Not Saleable