Tektronix RSA2200A, User Manual

Page: 36 / 354

Installation
1- 10
RSA2203A & RSA2208A User Manual
Applying Power
Power on the analyzer using the following procedure:
The analyzer operates from an AC line frequency of 47--63 Hz, over the range of
90--250 Volts, without the need for configuration, except the power cord. Refer
to page D--2 for the power cord options.
The maximum power consumption is 350 W. Refer to Appendix A, Specifica-
tions,
for additional information on power and environmental requirements.
CAUTION.
Use only power cords that are approved for the country of use. Using
non-approved power cords could result in fire or shock hazard.
1. Plug the power cord into the AC input on the rear panel.
AC input
Figure 1- 7: AC Input (rear panel)
2. Connect the plug of the power cord to a properly grounded outlet.
AC Power Requirements
Connecting the Power
Cord