Tektronix RSA2200A, User Manual

Page: 116 / 354

Tutorial
2- 62
RSA2203A & RSA2208A User Manual
Although three views are normally displayed in the Demod mode, you can select
one view to display full screen. This section describes how to display one view
and change the vertical and horizontal scales using the VIEW keys.
1. Press the RUN/STOP key to stop data acquision and observe the waveform.
2.
Press the VIEW:
SELECT
key to select the main view.
The selected view is surrounded with a white frame.
VIEW keys
3. Press the DEFINE key, and then the Show Views side key, shown in
Figure 2--55, to select Single .
Only the main view is displayed, with the size enlarged on the screen.
Show Views
Select Single to show only the
selected view with the size enlarged.
Figure 2- 55: Single view display
Displaying Single View
and Changing Scale