Tektronix RSA2200A, User Manual

Page: 264 / 354

Marker Operation and Peak Search
3- 144
RSA2203A & RSA2208A User Manual
As shown in Figure 3--103, the marker readout relative to the reference cursor is
shown in the top left portion of the screen for the active marker selected using
the Select Marker side key.
To turn off the reference cursor, press the Reference Cursor Off side key.
Use the following steps to change the trace on which you operate the marker
when displaying two traces on a view. Trace 1 is displayed in yellow and Trace 2
in green.
In the S/A (spectrum analysis) mode, two traces are shown when Trace 2 is
turned on using the TRACE/AVG menu.
In DEMOD (modulation analysis) mode and TIME (time analysis) mode, two
traces are shown in IQ vs. Time view (I level vs. time and Q level vs. time).
1. Press the MAKER SETUP key on the front panel.
2. Press the Go to page 2 (of 2) (bottom) side key to show the next menu page.
3.
Press the
Assign Marker X to Trace
side key to select Trace
1
or
2
, as
shown in Figure 3--104.
The marker moves to another trace with the same horizontal position.
Assign Marker X to Trace
Selects the trace to place the marker.
The marker moves to another trace
with the same horizontal position.
Trace 1
Trace 2
Figure 3- 104: Changing the Trace
Changing the Trace