Installation Instructions
Figure 13: Slide-out track assemblies
b.
Align the rear bracket to the right slide-out track as shown. (See
Figure 13.) Note that the rear bracket has multiple pairs of mount-through
holes. When aligning the bracket and track, be sure to select a pair of holes
that mount the rear bracket so that the
fl
ange-to-
fl
ange distance matches
the distance between the front rail and rear rail measured in step a.
c.
Using a screwdriver with a number two PoziDriv tip, secure the rear
bracket to the right slide-out track using two screws (10-32) and a bar nut
as illustrated. Leave the screws loose so that the overall length of the
slide-out track assembly can be adjusted when installing it in the rack.
d.
Repeat steps b and c to assemble the left slide-out track assembly.
RMD5000 Rackmount Kit Instructions
17
