Installation Instructions
Install
This section describes mounting the rackmount parts to the instrument.
Equipment Required:
Torque driver with T-15 and T-20 tips.
1.
Assemble the left and right mounting plates to the bottom support plate
using six 6-32 x 0.250 inch pan head T-15 TORX-drive screws tightened to
8 in-lb. (See Figure 6.)
NOTE.
The bottom support plate has holes to facilitate mounting optional
accessories. You can use screws or nylon straps to mount accessories.
Figure 6: Assembling the left and right mounting plates
RMD5000 Rackmount Kit Instructions
9
