Specifications
3–14
TMS 420 R3051, R3052 & R3081 Microprocessor Support Instruction Manual
not be accessible on the probe adapter board. The following paragraphs and
tables list signals that are or are not accessible on the probe adapter board.
For a list of signals required or not required for disassembly, refer to the channel
assignment tables beginning on page 3–6. Remember that these channels are
already included in a channel group. If you do connect these channels to other
signals, you should set up another channel group for them.
The probe adapter does not provide access for the following microprocessor
signals:
H
RSVD3
H
RSVD4
H
CLKIN
Table 3–14 lists extra sections and channels that are left after you have connected
all the probes used by the support. You can use these extra channels to make
alternate SUT connections.
Channels not defined in a channel group by the TMS 420 software are logged in
with the Master sample point.
Table 3–14: Extra module sections and channels
Module
Section: channels
102-channels
Qual:1, Qual:0, C2:4
136-channels
E3:7-0, E2:7-0, E1:7-0, E0:7-0, Qual:3-0, C2:4
96-channels
C2:4
These channels are not defined in any channel group and data acquired from
them is not displayed. To display data, you will need to define a channel group.
Signals Not On the Probe
Adapter
Extra Channels