Getting Started
TMS 420 R3051, R3052 & R3081 Microprocessor Support Instruction Manual
1–7
5. Line up the pin 1 indicator on the microprocessor with pin 1 of the PLCC
socket on the probe adapter.
CAUTION.
Failure to correctly place the microprocessor into the probe adapter
might permanently damage all electrical components once power is applied.
6. Place the microprocessor into the probe adapter as shown in Figure 1–4.
Microprocessor
Probe adapter
Foam
Bevel at both corners
Figure 1–4: Placing a microprocessor into a PLCC probe adapter