Tektronix P7625, Quick Start User Manual

Page: 59 / 88

Basic Operation
Connect the P75PST or P75TLRST
Solder Tip
1. Identify a location where the tip can be
placed, soldered, and secured to your
circuit.
NOTE. You can work with long wires (~1 inch),
but keep the fi nished wire lengths of the signal
and ground connections as short as possible.
2.
Lay the wires against a circuit board pad,
trace, or other conductive feature. (If vias
or through-holes are very close, you can
thread the wires through them.)
3.
Solder the wires to your circuit.
NOTE. For best results, use a fl ux pen to clean
your connections before soldering.
P7600 Series TriMode Probes Quick Start User Manual 45