Tektronix P7625, Quick Start User Manual

Page: 39 / 88

Basic Operation
Probe Setup Screen
Use the Probe Setup screen to adjust the probe input settings for the measurement you are taking. (See Figure 4.) To display the
Probe Setup screen, select Probe Cal from the oscilloscope Vertical menu. The Probe Setup screen has two sections to con
fi gure
the inputs; one to select the input mode and adjust the offset voltages, and the other to set the termination voltages. The Input
Mode pull-down selection and status box applies to both the Offset Voltage and to the Termination Voltage control sections.
The following pages describe the controls and status fi elds in the Probe Setup screen.
Figure 4: Probe Setup screen
P7600 Series TriMode Probes Quick Start User Manual 25