Tektronix P7625, Quick Start User Manual

Page: 18 / 88

Installation
Connect TriMode Adapters to the Probe Body
TriMode adapters are required to complete the connection between the probe and your circuit, and are brie fl y described below. The
adapters connect the P7600 Series probes to your circuit through 2.92 mm or SMP cables, or through P7500 Series solder tips,
such as the P75PST Performance Solder Tip. The adapter inputs are polarized, with the A input marked in red and the B input
marked in black. The adapters should be connected to the probe before the probe is connected to the instrument.
1. P76CA-292
Use this adapter with high quality,
skew-matched cables that have male
2.92 mm connectors at the probe end. The
other end of the cables can be customized with
connectors that mate to your circuit.
2. P76CA-292C
This adapter includes a pair of skew-matched,
6 inch cables with male 2.92 mm connectors.
3. P76CA-SMP
This adapter includes a pair of skew-matched,
6 inch cables with female SMP connectors.
4. P76TA
Use this adapter with P7500 Series probe
solder tips. (See page 39,
Connecting to a
Circuit Board .)
4 P7600 Series TriMode Probes Quick Start User Manual