P6112 Instructions
1
Features and Accessories
The P6112 Passive Probe is designed for use with a TDS 200 series
oscilloscope that has a bandwidth of 100 MHz or less.
The P6112 Passive Probe is listed with Underwriters Laboratories
Inc. and meets the requirements of UL 3111–1, ground referenced.
NOTE
. Remove and discard the protective cover on the tip of the
probe before attempting to connect a probe tip accessory.
P6112 Features and Standard Accessories
BNC-to-Probe Tip Adapter
–
To install the adapter, push the wide
end firmly into a BNC connector. Then, insert the probe tip firmly into
the adapter.
Retractable Hook Tip
– Use the retractable hook tip to make
hands-free measurements.
NOTE To ensure a proper connection, firmly twist the hook tip onto the
probe.
Marker Rings
– To identify probe connections, attach matching
colored rings onto the probe cable and tip as shown.
Unlocked
Locked
Locking Connector
– Install the connector in the unlocked position
and turn it clockwise until it snaps into the locked position.
