P6112 Instructions
i
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use product only as specified.
Only qualified personnel should perform service procedures.
Injury Precautions
Avoid Electric Overload.
To avoid injury or fire hazard, do not apply
potential to any input, including the common inputs, that varies from
ground by more than the maximum rating for that input.
Avoid Electric Shock.
To avoid injury, do not connect or disconnect
probes or test leads while they are connected to a voltage source.
Do Not Operate in an Explosive Atmosphere.
To avoid injury or fire
hazard, do not operate this product in an explosive atmosphere.
Keep Probe Surface Clean and Dry.
To avoid electric shock and
erroneous readings, keep probe surface clean and dry.
Product Damage Precautions
Do Not Operate With Suspected Failures.
If you suspect there is damage
to this product, have it inspected by qualified service personnel.
Do Not Immerse in Liquids.
Clean the probe using only a damp cloth.
Refer to Cleaning Instructions, page ii.
Safety Terms and Symbols
Terms in This Manual.
These terms may appear in this manual:
WARNING.
Warning statements identify conditions or practices that
could result in injury or loss of life.
CAUTION.
Caution statements identify conditions or practices that
could result in damage to this product or other property.
