Tektronix MSO54, Programmer'S Manual

Page: 542 / 1026

Commands listed in alphabetical order
PLOT:PLOT<x>:NUMBins
This command sets or queries the current histogram resolution.
Group Plot
Syntax
PLOT:PLOT<x>:NUMBins {TWENtyfive|FIFTY|HUNdred|TWOFifty|
FIVEHundred|TWOThousand|MAXimum}
Arguments
Arguments are the number of bins.
Examples
PLOT:PLOT4:NUMBins TWENTYFIVE
sets the number of bins to 25.
PLOT:PLOT4:NUMBins?
might return
:PLOT:PLOT4:NUMBINS TWOFIFTY
indicating the histogram resolution is 250 bins.
PLOT:PLOT<x>:SOUrce<x>
This command sets or queries the plot source.
Group Plot
Syntax
PLOT:PLOT<x>:SOUrce<x> MEAS<x>
PLOT:PLOT<x>:SOUrce<x>?
Arguments
MEAS<x>
is the speci fi ed measurement source for the speci fi ed plot.
Examples
PLOT:PLOT1:SOUrce1 MEAS2
sets source 1 of plot 1 to measurement 2.
PLOT:PLOT1:SOUrce1?
might return
:PLOT:PLOT1:SOURCE1 MEAS1
indicating the speci fi ed source of the speci fi ed plot is measurement 1.
PLOT:PLOT<x>:SPECtrum:BASE
This command sets or queries the spectrum base. Unde fi ned for non-spectrum
plots.
Group
Plot
2-526 MSO54, MSO56, MSO58, MSO58LP Programmer