Tektronix LumaColor II J18, Instruction Manual

Page: 37 / 114

Tutorial
J18 Photometer Instruction Manual 2–7
3. Repeatedly press the DIFF/REF button to select the desired
reference memory location. The reference location is shown on
the top of the display. See Figure 2–2. Readings can be stored
only in reference locations 1 to 10.
Figure 2–2: Selecting a Reference Memory Position
4. Press the STORE button to store the measurement. After storing
the measurement, the photometer goes into the differential
measurement mode. To return to absolute readings, press the
HOLD/RUN button to clear the differential display.
Recalling Stored Measurements
To view the values stored in the memory locations, perform the
following steps:
1. Press the DIFF/REF button to select the differential measure-
ment mode.
2. Repeatedly press the DIFF/REF button to step to the desired
reference memory location.
3. Press the ALT/DISP button so that the memory location begins to
flash and the display indicates the values stored in the memory
location.
4. Press the HOLD/RUN button to return to the differential
measurement mode.
Tutorial
J18 Photometer Instruction Manual 2–7
3. Repeatedly press the DIFF/REF button to select the desired
reference memory location. The reference location is shown on
the top of the display. See Figure 2–2. Readings can be stored
only in reference locations 1 to 10.
Figure 2–2: Selecting a Reference Memory Position
4. Press the STORE button to store the measurement. After storing
the measurement, the photometer goes into the differential
measurement mode. To return to absolute readings, press the
HOLD/RUN button to clear the differential display.
Recalling Stored Measurements
To view the values stored in the memory locations, perform the
following steps:
1. Press the DIFF/REF button to select the differential measure-
ment mode.
2. Repeatedly press the DIFF/REF button to step to the desired
reference memory location.
3. Press the ALT/DISP button so that the memory location begins to
flash and the display indicates the values stored in the memory
location.
4. Press the HOLD/RUN button to return to the differential
measurement mode.